What Is a Smart Power Strip? Uses & Buying Guide

A smart power strip combines the convenience of a traditional power strip with app-based control, schedules, timers, and compatible voice assistants. Instead of treating every connected device as one group, many smart models let you control individual outlets from your phone—useful for home offices, entertainment centers and everyday household devices.

What makes a power strip smart?

A regular power strip mainly adds outlets. A smart power strip adds a Wi-Fi connection and software controls. Once the strip is connected to a compatible 2.4 GHz Wi-Fi network and mobile app, you can turn supported outlets on or off remotely, create routines, and check their current state without reaching behind furniture.

Common smart power strip features include:

• Remote on/off control through a mobile app
• Independent control of individual AC outlets
• Schedules and countdown timers
• Amazon Alexa or Google Home voice control on compatible models
• Overload protection and a fire-resistant housing

How does a smart power strip work?

After setup, the strip communicates with the supported app through your home Wi-Fi network. Commands from the app or a linked voice service tell the internal switches to supply or cut power to specific outlets. Scheduled actions are stored through the product's supported smart-home system, so a lamp can turn on at sunset or office accessories can switch off at the end of the workday.

Most Wi-Fi smart power products use the 2.4 GHz band because it provides broad household coverage. During setup, keep the strip close to the router, confirm that 2.4 GHz Wi-Fi is enabled, and follow the reset instructions if the indicator does not enter pairing mode.

Smart power strip vs. smart plug

A smart plug controls one connected device and is ideal when you need automation at a single wall outlet. A smart power strip controls several devices from one grounded connection. It is usually the better choice for a desk, charging station, or entertainment area where several devices are located together.

A smart strip is not automatically the right choice for every appliance. Always check the strip's voltage, amperage, and wattage limits, and do not use it with equipment that exceeds the product rating. High-current heating appliances and devices that require a dedicated circuit should be connected according to their manufacturer's instructions.

Useful ways to use a smart power strip

Home office

Connect a monitor, task light, and selected accessories, then create a weekday schedule that powers down nonessential equipment after work. This can simplify a desk setup and reduce unnecessary standby time.

Living room

Group selected entertainment accessories in one location while retaining individual control. A voice command can switch off a lamp or media accessory without moving furniture to reach the outlet.

Everyday routines

Schedules are helpful for lamps, seasonal decorations and other devices that should operate at predictable times. Countdown timers can also turn a connected device off automatically after a set period.

What to look for when choosing one

• Electrical rating: Match the voltage and maximum combined load to the devices you plan to connect.
• Independent outlets: Confirm which outlets can be controlled separately.
• Wi-Fi compatibility: Check the required frequency and supported app.
• Voice compatibility: Verify support for your preferred voice ecosystem.
• Safety certifications: Look for relevant independent testing marks and clear load information.
• Physical layout: Make sure plugs and adapters fit without blocking neighboring outlets.

Meet the LinkVolt 20307 smart power strip

The LinkVolt 20307 3-outlet smart power strip provides three independently controlled grounded AC outlets with app control, schedules, timers, and compatible voice control. It is rated for 125V AC, 60Hz, 15A and up to 1875W resistive load. The product supports 2.4 GHz Wi-Fi and includes overload protection in a fire-resistant housing.

Use the strip only in a dry indoor location, connect it directly to a properly grounded outlet, and keep the total connected load within its rating. Do not daisy-chain it with another strip or extension device.

Frequently asked questions

Does a smart power strip need a hub?

The LinkVolt 20307 does not require a separate smart-home hub. It connects through a compatible 2.4 GHz Wi-Fi network and app.

Can every outlet be controlled separately?

On the LinkVolt 20307, the three grounded AC outlets can be controlled independently through the supported app.

Will it work if the internet is unavailable?

The physical power button remains useful, but remote access, voice services and cloud-based functions may be unavailable until the network connection returns.

Final takeaway

A smart power strip is a practical way to add control and scheduling to several nearby devices. Choose a model with clearly stated electrical limits, the controls you need, and a layout that suits your setup. Explore more LinkVolt smart power products for additional options.